Behavior of PAHs from sewage sludge incinerators in Korea

Although production of sewage sludge increases every year, its proper treatment has only been recently raised as a new issue, as current landfill and ocean dumping arrangements are expected to become increasingly difficult to manage in the future. The Korean Ministry of Environment plans to diversify its processing facilities and expand its processing systems by 2011, with the purpose of processing all sludge produced in Korea. According to this plan, incineration (including incineration of municipal wastes) will process 30% of the entire sewage sludge throughout the country in 2011. This study reviews the characteristics of PAH, which is one of the organic substances found in sewage sludge during the incinerating process. The total amount of PAH produced from sewage sludge incineration was found to be 6.103 mg/kg on average, and investigation performed on 16 PAHs of inlets and outlets of the air control devices at five full-scale incineration facilities showed that concentrations of the PAHs on the inlet and on the outlet ranged from 3.926 to 925.748 microg/m(3) and from 1.153 to 189.449 microg/m(3), respectively. In the case of the incineration facility fed with municipal waste (95%) and sewage sludge (5%), the total of the PAH emissions concentration was higher than that found at the incineration facilities used exclusively to treat sewage. The combustion of waste vinyl and plastics contained in municipal waste fed into the facility might contribute to the high levels of PAHs in the stack gas. However more investigation is needed on the production mechanism of PAHs at different operating conditions of the incineration facilities, such as the types of waste, and other relevant factors.     

Gene expression analysis and classification of mode of toxicity of polycyclic aromatic hydrocarbons (PAHs) in Escherichia coli

Escherichia coli is known to respond to certain toxic chemicals through an increased expression of various stress genes. In this study, therefore, the expression of recA, katG, fabA and grpE genes was used as a representative for DNA, oxidative, membrane and protein damage, respectively, after E. coli was exposed to different polycyclic aromatic hydrocarbons (PAHs), i.e., phenanthrene, naphthalene and benzo[a]pyrene. To accomplish this, the expression levels of these four genes were quantified using a real-time RT-PCR analysis when E. coli cultures were under stressful conditions, such as those caused by an exposure to mitomycin C, hydrogen peroxide and phenol. It was found that the primary toxic effect of each chemical is clearly seen when the expression levels of the different genes are compared. Tests with the PAHs showed naphthalene and benzo[a]pyrene to be genotoxic, while phenanthrene had no clear effect on the expression of any of these genes. Based on these results, the effects due to these toxic chemicals and the extent of each stress can be evaluated with ease using the expression levels of different stress responsive genes.     

The Characteristics of Tropospheric Ozone Seasonality Observed from Ozone Soundings at Pohang, Korea

This paper presents the first analysis of vertical ozone sounding measurements over Pohang, Korea. The main focus is to analyze the seasonal variation of vertical ozone profiles and determine the mechanisms controlling ozone seasonality. The maxima ozone at the surface and in the free troposphere are observed in May and June, respectively. In comparison with the ozone seasonality at Oki (near sea level) and Happo (altitude of 1840 m) in Japan, which are located at the same latitude as of Pohang, we have found that the time of the ozone maximum at the Japanese sites is always a month earlier than at Pohang. Analysis of the wind flow at the surface shows that the wind shifts from westerly to southerly in May over Japan, but in June over Pohang. However, this wind shift above boundary layer occurs a month later. This wind shift results in significantly smaller amounts of ozone because the southerly wind brings clean wet tropical air. It has been suggested that the spring ozone maximum in the lower troposphere is due to polluted air transported from China. However, an enhanced ozone amount over the free troposphere in June appears to have a different origin. A tongue-like structure in the time-height cross-section of ozone concentrations, which starts from the stratosphere and extends to the middle troposphere, suggests that the ozone enhancement occurs due to a gradual migration of ozone from the stratosphere. The high frequency of dry air with elevated ozone concentrations in the upper troposphere in June suggests that the air is transported from the stratosphere. HYSPLIT trajectory analysis supports the hypothesis that enhanced ozone in the free troposphere is not likely due to transport from sources of anthropogenic activity.     

The Emissions of Major Aromatic Voc as Landfill Gas from Urban Landfill Sites in Korea

In this study, concentrations of major aromatic VOCs were determined from landfill gas (LFG) at a total of five municipal landfill sites in Korea including Nan Ji (NJ), Woon Jung (WJ), Sam Poong (SP), Hoei Chun (HC), and No Hyung (NH). The concentration levels of those VOC were found to be significantly different, mainly as a function of such a parameter as landfill aging. The VOC concentrations measured from the unclosed landfill sites (e.g., WJ) were characterized by exceedingly high values above a few tens of ppm. However, the results of the abandoned site (e.g., SP) were about three orders of magnitude lower than the others so as to merely exceed the typical ambient concentration levels. It was most striking to find a systematic dominance of toluene over other aromatic VOC under most circumstances. The LFG flux values of all aromatic VOC and the four specific major ones (termed as BTEX: benzene, toluene, ethylbenzene, and xylene) were also computed for each vent pipe from all study sites using their concentrations and the concurrently determined environmental parameters. The results, if calculated in terms of the average BTEX quantity emitted per vent pipe, showed that the magnitude of their emissions can vary substantially, with the values ranging from 0.05 (SP) to 49.2 kg yr⁻¹ (WJ in wintertime). The LFG flux values of aromatic VOC, when compared to the contribution of non-methane hydrocarbons (NMHC), were able to explain a constant, but minor, proportion of the LFG carbon budget.     

Investigation of the generation of hydroxyl radicals and their oxidative role in the presence of heterogeneous copper catalysts

The presence and impact of hydroxyl radicals generated via the catalytic decomposition of H(2)O(2) over heterogeneous copper catalysts were investigated by using two detection methods, an electron spin resonance-spin trapping method and a chemical probe method. Detection of the (5,5-dimethyl-1-pyrroline-N-oxide)-OH adduct signal and formation of 4-chlorocatechol during the oxidation of a 4-chlorophenol substrate demonstrated that the three heterogeneous copper catalysts employed here (CuO, Cu/Al(2)O(3) and CuO.ZnO/Al(2)O(3)) were capable of generating hydroxyl radicals in combination with H(2)O(2). The oxidative mechanism of the hydroxyl radical in the presence of heterogeneous copper catalysts is discussed with regard to the further oxidation of the (5,5-dimethyl-1-pyrroline-N-oxide)-OH adduct and hydroxylated products of 4-chlorophenol oxidation. Interestingly, integration of the 5,5-dimethyl-1-pyrroline-N-oxide-OH adduct signal could not be used to reliably measure the total amount of hydroxyl radicals generated as a result of oxidative attack on the adduct. This may be as a result of locally higher hydroxyl radical concentrations in the presence of a heterogeneous catalyst leading to further unwanted oxidation of the (5,5-dimethyl-1-pyrroline-N-oxide)-OH.     

Multi-Criteria Assessment of Tensions in Resource Use at Continental Scale: A Proof of Concept with Australian Rangelands

The purpose of this study was to help to inform policy development for the Australian rangelands, and provide a proof of concept for application of a multi-criteria analysis approach to assessment of competing resource use at continental scale. The study aimed to identify and locate key natural resource and agricultural production assets in the rangelands, define a number of measures of potentially threatening processes, and use a multi-criteria approach to identify areas where threatening processes, agricultural production problems, or valuable natural resources coincided. The analysis used 35 readily available, continental spatial data layers at 5-km pixel resolution ranked from 1 (low) to 5 (high) under three themed groupings: natural resource base, production base, and threatening processes. These measures were aggregated into composite indicators to define attributes such as environmental sensitivity and total grazing pressure. The composites were then compared in a two-way analysis to explore particular interactions between threatening processes such as pastoralism and mining, and the condition of production and natural resource assets. These interactions were defined as “tensions” for purposes of this analysis. Example “tensions” included the association of high grazing intensity with areas of high environmental sensitivity, indicating a risk of land degradation under adverse climatic conditions. A summary of patterns of tension was obtained by extracting area proportions of high-tension classes for selected Natural Heritage Trust Regions, which are a basis for Australian Government funding of improved environmental management. The study provides a basis for further examination of trade-offs in the use of natural assets, opportunities for improved productivity and sustainability, and social and economic implications.     

A Study of Sorptive Loss Patterns for Reduced Sulfur Compounds in the Use of the Bag Sampling Method

In this work, the basic properties of the bag sampling method were examined and characterized in terms of recovery rate with respect to four reduced sulfur compounds (RSC) including H₂S, CH₃SH, DMS, and DMDS. For this comparative study, two types of calibration approaches were performed to evaluate the relative RSC loss due to bag sampling. As a reference calibration tool, a syringe dilution (SD) method was applied. The working standards prepared by diluting the primary standard in a gas-tight syringe (as a mixing chamber) were injected to the GC/PFPD through a loop-injection system to yield a background calibration information. In contrast, the target calibration was performed based on a bag dilution (BD) method. To this end, working standards for multiple calibration points were prepared by two different bag types (Tedlar bag (TB) and polyester bag (PB)). These standards were then drawn by the same syringe and injected into the GC/PFPD via loop. On the basis of these comparative analyses, both absolute and relative differences in RSC recovery rates (RR) were evaluated (e.g., comparison of wall-loss effect). The results indicate that TB has a mean RR of 87% for the four RSC with their values ranging from 82 (CH₃SH) to 91% (DMDS). On the other hand, the results of PB generally exhibited slightly reduced RR with their mean values of 77% (range: 73% of H₂S to 83% of DMS). The results of this study generally suggest that the losses of RSC samples, while inevitable with the bag sampling method, exhibit certain patterns between different RSCs and between different grab sampling materials.     

Distribution of dioxins, furans, and dioxin-like PCBs in solid products generated by pyrolysis and melting of automobile shredder residues

Polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls (PCBs) in char and slag produced from automobile shredder residue by pyrolysis and melting process were analyzed to measure changes in the characteristics and distribution of their congeners caused by thermal treatment. In particular, a large quantity of dioxin-like PCBs occurred in low-chlorinated congeners. The concentration of PCDDs/PCDFs in char was 0.542 microg/kg, with mostly PCDFs dominant and its toxicity equivalent concentration (TEQ) was about 70ngTEQ/kg. The concentration and toxicity equivalent concentration of dioxin-like PCBs in char were 0.869 microg/kg and 1.60ngTEQ/kg, respectively. Melted char slag was produced using various cooling methods: water quenching, air cooling, and slow cooling. The concentrations of PCDDs/PCDFs in slag produced by the methods were 1.51, 1.38, and 2.43ngTEQ/kg, respectively; those of dioxin-like PCBs were close to 0.01ngTEQ/kg. The congener distributions varied only slightly among the cooling methods. Applying melting procedure to char reduced PCDD/PCDF concentration by 95.3%, and the corresponding TEQ concentration was reduced by 97.9%. We thus conclude that melting process is an efficient way to reduce the concentrations of PCDDs/PCDFs in solids produced by pyrolysis.